Product Category
|
Contact Us
|
|
|
You are here:Home > Product > Pipe cutting saw bladeProduct |
|
型号:Natural (white) |
Specification:Out Diameter φl50-600mm bore φ27-50mm Thickness:0.2-5mm Sufface coating:Natural (white). Types:Teeth or Teethless Teeth Types:acuate,circular arc,rugged. It is made according to application Material: M2, W9Mo3Cr4V and super-hard High Speed Steel Application: Circular saws in high speed steel or in super high speed steel suitable for cutting-off steels and alloys with hardness between 500N/mm2 and 800N/mm2. The saw blades are used on manual,semi-automatic and fully automatic sawing machines to cut tubes and pipes,open sections and solid sections up to 200mm Remark:Different application make out different teeth types and teeth number. |
Detail>> |
|
|
|
型号:Special Oxidation—vapo |
Specification:Out Diameter φl50-600mm bore φ27-50mm Thickness:0.2-5mm Sufface coating:It produces a layer of iron oxdie(Fe3O4) on the Surface,which Increases the wear-resisting and increases the overall life.Suitable for general cutting work. Types:Teeth or Teethless Teeth Types:acuate,circular arc,rugged. It is made according to application Material: M2, W9Mo3Cr4V and super-hard High Speed Steel Application: Circular saws in high speed steel or in super high speed steel suitable for cutting-off steels and alloys with hardness between 500N/mm2 and 800N/mm2. The saw blades are used on manual,semi-automatic and fully automatic sawing machines to cut tubes and pipes,open sections and solid sections up to 200mm Remark:Different application make out different teeth types and teeth number. |
Detail>> |
|
|
|
型号:TiN(Titanium Nitride) |
Specification:Out Diameter φl50-600mm bore φ27-50mm Thickness:0.2-5mm Sufface coating:This is an excellent PVD coating for protecting saw blades form wear,which is a good choice for ironbased materials and cutting conditions requiring resistance to both abrasive and adhesive Wear. Types:Teeth or Teethless Teeth Types:acuate,circular arc,rugged. It is made according to application Material: M2, W9Mo3Cr4V and super-hard High Speed Steel Application: Circular saws in high speed steel or in super high speed steel suitable for cutting-off steels and alloys with hardness between 500N/mm2 and 800N/mm2. The saw blades are used on manual,semi-automatic and fully automatic sawing machines to cut tubes and pipes,open sections and solid sections up to 200mm Remark:Different application make out different teeth types and teeth number. |
Detail>> |
|
|
|
型号:CrN(Chrome Nitride) |
Specification:Out Diameter φl50-600mm bore φ27-50mm Thickness:0.2-5mm Sufface coating:TIALN iS a new multi—layer wear protection PVD coating.Recomended for high tensile strengthmaterials above 800N/ram2 and stainless steel.Responds very favourably to high speed and feed ratesas rates well as extreme working conditions like dry cutting.. Types:Teeth or Teethless Teeth Types:acuate,circular arc,rugged. It is made according to application Material: M2, W9Mo3Cr4V and super-hard High Speed Steel Application: Circular saws in high speed steel or in super high speed steel suitable for cutting-off steels and alloys with hardness between 500N/mm2 and 800N/mm2. The saw blades are used on manual,semi-automatic and fully automatic sawing machines to cut tubes and pipes,open sections and solid sections up to 200mm Remark:Different application make out different teeth types and teeth number. |
Detail>> |
|
|
Total 4 product 1/1page 4product/page
1 |
|
|